高性能高速道路 800t ガーダー クレーン インストール ランチャー
高性能高速道路 800t ガーダー クレーン インストール ランチャー

高性能高速道路 800t ガーダー クレーン インストール ランチャー

高性能高速道路800tガーダークレーン設置ランチャー 幅広い作業の適応、優れた性能、便利な操作性、安全構造を融合した橋桁建立機

お問い合わせを送信してください

説明

基本情報
モデル番号。BGM
タイプ普通
カート横移動速度(M/分)2.45
カート前後移動速度(M/Min)4.25
橋梁搬送車の速度(M/Min)8.5
戻り速度(M/分)17
輸送能力(T)100*2
適用スキューブリッジ角度0~450
トーリー前後移動速度(M/Min)4.25
トロリー上昇速度 (M/分)0.8
適用スパン(M)≤55
吊り上げ能力(T)200トン
輸送パッケージコスト削減のためのコンテナ積み込み
仕様40'HQ またはバルク貨物船
商標ヌクラネス
起源河南省長原市
生産能力100セット/月
製品説明
高性能高速道路800tガーダークレーン設置ランチャー

High Performance Highway 800t Girder Crane Install Launcher


橋桁建立機は、幅広い作業範囲、優れた性能、便利な操作性、安全構造を単一の全体に統合しています。 鋼構造のレール式プレキャストビーム昇降ラック装置です。 この製品は、平坦な建設だけでなく、山岳道路の法面、小半径の曲線橋、斜橋、トンネル橋の建設にも使用できます。

High Performance Highway 800t Girder Crane Install Launcher

High Performance Highway 800t Girder Crane Install Launcher


High Performance Highway 800t Girder Crane Install Launcher

High Performance Highway 800t Girder Crane Install Launcher

50 t : 2 setsΦ19.5 steel wire rope 8 m: 4 ropesSleepers: severalElectric welding machine: 1 setOxygen, acetylene: 1 setHammer(12 pound and 8 pound): 1 set for eachWrench and pincher: several Gradienter: 1 set3. What are inspection standard for load test of bridge launching tube beam launcher crane?Dynamic load test: 1.1 times rated load.Static load test: 1.25 times rated load.4. How to make highway bridge concrete girders?Highway Bridge concrete girders could be made by 4 methods:a. Full span prefabrication.b. Segment girder prefabrication.c. Full span cast-in-place girder.d. Segment cast-in-situ.5. How about maintenance of bridge launching tube beam launcher crane?a. Lubricating:Working performance and service life of all mechanisms of crane depend on lubricating to a big extent.b. Steel wire rope:Fracture of wire has to be specially noticed. A new steel wire rope has to be changed immediately with the condition of broken wire, broken strands and wear loss to scrapping standard.c. Spreader: The spreader has to be checked regularly.d. Pulley block:Mainly check rope race wearing condition, check whether wheel flange is cracked and whether pulley could get stuck in the axle or not.e. Wheels:Regularly check wheel flange and tread, a new wheel has to be immediately replaced as crack part or wearing in wheel flange reaches 10% of wheel thickness;Re-polishing has to be done as diameters between two driving wheels on tread differs more than D/600, or there are severe scar on the tread.f. Brake: Check one time per shift; The brake should be in accurate movement, and pins do not allow to be stuck. Brake shoes shall fit brake wheels correctly; the brake shoes interval shall be equal to open them.br>